User manual

PQ3350 V5.2 11/10 30
SET THE CT AND VT (PT) RATIO
Press the SETUP button several times until CT or VT is shown in reverse video.
Press the
▲
or
▼
button to increment or decrement the value by 1. Holding the
▲
or
▼
button will
speed up the process of incrementing or decrementing. To exit, press the EXIT button.
The CT ratio range is 1 to 600. The VT ratio range is 1 to 3000. Once the CT or VT (PT) is set, the voltage
and current readings are as follows:
CURRENT (displayed) = CURRENT (measured) x CT Ratio
VOLTAGE (displayed) = VOLTAGE (measured) x VT Ratio