User Manual

ExStik
TM
(PH100, PH110, & RE300) Version 2.6 02/04
Page 6
Battery Replacement
1. Twist off the battery compartment cap
2. Replace the four (4) SR-44 button batteries observing polarity
3. Replace the battery compartment cap
Battery Note: For maximum battery life, use battery style SR-44 (Silver Oxide) such
Energizer
TM
No. 356 or Duracell
TM
No. 303/357.
Electrode Refilling
The electrode does not need to be detached from the body of the ExStik
TM
in order to refill
it as long as the electrode is of the refillable type. Refillable electrodes have a removable
reference junction (slotted) and the word REFILLABLE on the side of the electrode casing.
Instructions for removing the reference junction and filling the electrode are provided with
the refill kit. See ‘Optional Accessories’ below for refill kits and refillable electrodes.
Optional Accessories
• Tripak buffers with 4, 7 & 10 pH capsules (6 each) plus two rinsing solutions (Part
Number: PH103)
• Spare pH Electrode – non-refillable (Part Number: PH105)
• Spare pH Electrode - refillable (Part number PH115)
• Electrode Refill solution (Part number PH113)
• Spare ORP electrode (Part Number: RE305)
• Spare Chlorine electrode (Part Number: CL205)
• Weighted base with 5 solution cups (Part Number: EX006)
Note: If the unit is to be converted for Chlorine use by attaching the chlorine electrode,
please request a CL200 User Guide
Rear
Top View of ExStik
TM
Front (LCD Side)