User manual

MO297 V3.2 07/10
8
MeterLink™ Bluetooth Communication
This meter includes a Bluetooth module designed to communicate with the FLIR T/B200,
T/B300, T/B360, T/B400 or i/b60 cameras. The combination of a moisture meter and an IR
camera is used for analysis and documentation of moisture in buildings.
Setup
1. Enable the MO297 bluetooth by pressing and holding the ▲button for two seconds.
The bluetooth icon will appear in the display.
2. Pair the meter to the camera by following the “Pairing Bluetooth Devices” section in
the thermal camera manual.
3. Once paired, the data from the MO297 will be continuously displayed and updated on
the camera display.
4. Readings stored into memory can be recalled and applied to live thermal images.
Image Editing
A single or series of readings can be applied to a single image by saving and entering the
image edit mode. Data stored in the MO297 memory can also be added to the image.
MO297