User Guide

Ordering Information:
MO295............Pinless Moisture Psychrometer w/Memory + IR Thermometer
MO290-P........Replacement Pin Moisture Probe
Features:
• Quickly indicates the moisture content of
materials with Pinless technology without
damaging the surface; Remote Pin-type
probe (MO290-P included) allows for contact
moisture readings (3ft/0.9m cable length)
•Manually store/recall up to 20 labeled
readings
• Works on multiple wood types and other
building materials
• Easy to read, large dual display with
automatic backlight feature
• Simultaneously displays moisture value
of wood or material being tested, Air
Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm)
below the surface
• Programmable high/low Moisture and
Humidity alarms
• Designed with a patented IR circuit to
measure non-contact surface temperature;
8:1 distance to spot ratio with 0.95 fixed
emissivity
• Built-in Humidity/Temperature probe
measures Relative Humidity, Air Temperature
plus Grains Per Pound (GPP)/(g/kg), Dew
Point (DP), Vapor Pressure, and condensation
point
• Automatic calculation of differential
Temperature (IR - DP) to determine
condensation point
• Fast Analog Bargraph
• Min/Max and Data Hold
• Auto power off and low battery indication
• Complete with pin moisture probe with cable,
9V battery and case
8-in-1 Meter with Memory and Patented Built-in IR Thermometer
Monitor moisture in wood and other building materials with virtually no surface damage with the Pinless Moisture sensor
(Pin-type Moisture Probe included). Stores up to 20 labeled readings for further analysis. Measure Humidity and Air
Temperature with built-in probe plus non-contact InfraRed Temperature with patented IR design.
Pinless Moisture Psychrometer + IR Thermometer
Patented IR thermometer design
locates cold spots on walls, which
identifies surfaces subject to
condensation (direct differential
display of IR - DP)
Measure moisture of wall
material with non-invasive
Pinless technology
Pin Moisture Probe included for
making contact moisture
measurements
Patented
Specifications
Sensor Type Non-Penetrating
Memory Manually Store/Recall 20 data readings
Pinless Moisture 0 to 99.9 (Relative)
Pinless Depth up to 0.75" (19mm)
Pin-type Moisture (probe included) 0 to 99.9%
Max Resolution 0.1, 0.1°F/°C
Humidity 0 to 100%RH
Temperature (Air) -20 to 170°F (-29 to 77°C)
Temperature (IR) -4 to 392°F (-20 to 200°C)
Vapor Pressure 0 to 20.0kPA
Dew Point -22 to 199°F (-30 to 100°C)
Mixing ratio 0 to 999GPP (0 to 160g/kg)
Field of View 8:1 Distance to Target ratio
Emissivity 0.95 fixed
Dimensions 6.5x2.8x1.5” (165x70x38)
Weight 7.4oz (210g)
Visit us at www.TestEquipmentDepot.com
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com