Product Manual

MA3010_MA3018en‐GB_V1.01/15
7
ACCurrentMeasurements
WARNING:EnsurethatpowertothedeviceundertestisOFFbeforestartingthisprocedure.
SwitchpowertothedeviceundertestONonlyaftertheclamphasbeensafelyattachedtothe
deviceundertest.
CATUTION:DonotmovefingersabovetheLCDatanytimeduringatest.

1. SwitchthemeterOFFandswitchOFFpowertothedeviceundertest.
2. Turntheknurledclamplockmechanismcounter‐clockwisetoreleasetheflexibleclamp.
3. Fullyencloseonlyoneconductorofthedeviceundertestwiththeflexibleclampprobe (see
accompanyingdiagrams).Donotattemptto
measurecurrenthigherthanthespecified
currentlimit.
4. SwitchthemeterONandthenswitchpowertothedeviceundertestON.Nevermove
fingersabovetheLCDwhenrunningatest.
5. Readthecurrentvalueinthedisplay.Themeterwillautomaticallyselecttheappropriate
range.
