Product Manual

MA3010_MA3018en‐GB_V1.01/15
3
SafetyInformation
Toensurethesafeoperationandserviceofthemeter,followtheseinstructionsclosely.Failureto
observewarningscanresultinsevereinjury.

WARNINGS

WARNINGSidentifyhazardousconditionsandactionsthatcouldcauseBODILYHARMorDEATH.
 IndividualprotectiveequipmentshouldbeusedifHAZARDOUSLIVEpartsintheinstallation
wheremeasurementsaretobecarriedoutcouldbeaccessible.
 Iftheequipmentisusedinamannernotspecifiedbythemanufacturer,theprotection
providedbytheequipmentmaybeimpaired.
 Toreducetheriskoffireorelectricshock,donotexposethisproducttorainormoisture.
 Verifythemeteroperationbymeasuringaknowncurrent.Ifindoubt,havethemeter
serviced.
 Donotapplymore
thantheratedvoltage/currentasmarkedonthemeter.
 Toavoidfalsereadingsthatcanleadtoelectricshockandinjury,replacebatteryassoonas
thelowbatteryindicatorappears.
 Donotusethemeterinoraroundexplosivegasorvapor.
 Donotuseaflexiblecurrentsensoriftheinnercopperwireoftheflexiblecordisvisible.
 De‐energizetheinstallationundertestorwearsuitableprotectiveclothingwhenplacingor
removingtheflexiblecurrentprobefromatestsetup.
 Donotapply/removetheflexiblecurrentprobeto/fromUNINSULATEDHAZARDOUSLIVE
conductorswhichmaycauseelectricshock,electricburn,orarcflash.