Product Manual

MA260‐en‐GB_V1.15/15

DCVoltageMeasurements 

1. Inserttheblacktestleadbananaplugintothenegative(COM)jack

andtheredtestleadbananaplugintothepositive(V/Ω)jack.

2. Touchthetestprobetipstothecircuitundertest.Besureto

observethecorrectpolarity(redleadtopositive,blackleadto



negative).

3. Readthe voltageinthedisplay.Thedisplaywillindicatetheproper

decimalpointandvalue.Ifthepolarityisreversed,thedisplaywill

show(‐)minusbeforethevalue.

4. ThemeteriscapableofdetectingDCvoltagesfrom+2.1Vto

+1000Vandfrom‐0.7V

to‐1000V.

5. Themeter’salertbeeperwillsoundashorttoneforpositiveDC

voltagemeasurementsandalongtonefornegative

measurements.

ACCurrentMeasurements

WARNING:Donothandlethemeterabovethefingerandhandguardbarrier.

CAUTION:ObserveCATIV600VwithrespecttoEarthGroundfortheJaw.

1. Positionthe clamparoundoneconductorwiththeconductorpositionedasfarintotheclamp

jawaspossible.Seeaccompanyingdiagramsforcorrectandincorrectuse.

2. Readthe currentinthedisplay.Thedisplaywillindicatetheproperdecimalpointandvalue.

