User manual

EXTECHINSTRUMENTS
4IR300UV‐en‐GB_V1.01/16
Operation
MeterPower
Themeterispoweredbythree1.5VAAbatteries.Withfreshbatteriesinstalled,themeter
switchesONwhenthetriggerispulled.RefertotheMaintenancesectionforBatteryInstallation
instructions.Thebatteryiconprovidesbatterystatusindication.Replacethebatteriesassoonas
thebatterystatusiconindicatesalowbattery.
SettingMode
Thevarious parameters ofthe meter aresetusingthe five ‐waymulti‐switch located belowthe
display.Theavailableparametersarelistedbelow:
 Flashlight(ONOFF)
 UVlight(ONOFF)
 TemperatureUnits(°C°F)
 Emissivity(0.10to1.00)
 Laserpointer(ONOFF)

Max/Min/Avg&Max‐Min(ONOFF)
 HILOAlarm(ONOFF)
 HighTemperatureAlarmLimitsetting
 LowTemperatureAlarmLimitsetting
 Beeper(ONOFF)
SettingModeOverview
The Settings switch has five positions to select a parameter, turn a
parameterONorOFF,andtoadjustparametervalues.
 PressandreleasetheMeasurementTrigger.
 Press the
 button left to enter the Setting Mode. The
parameterselectedwillappearinthedisplay.
 Pressthe
buttonrighttoadvancetothenextparameter.
 Presstheup
ordown buttonstochangeaparameterstatusoradjustaparameter
value.
 Pressthe buttontostoreparameterchangesandadvancetothenextparameter.
 Pressthe buttonlefttoexittheSettingsmodeandreturntoMeasurementmode.
Note:IfnobuttonispressedwithintheAPOtimethemeterwillshutdown.Itmaybehelpful
toextendtheAPOtimewhenmakingadjustmentsintheSettingsmode.