Product Manual

HDV600-EN-V2.0 5/11

Viewing an Image or Video on a PC

There are two methods to transfer stored files to a pc.

1. Remove the SD card from the monitor and insert it into the SD reader in the pc.

2. Connect the monitor to the pc with a USB cable.

Images are saved in *.JPG format and videos saved in *.AVI format

Deleting stored Images or Videos

1. Press the ▲ button to access the pictures or videos in memory.

2. When the file to be deleted appears, press the OK button and the DELETE YES/NO box

will appear.

3. Press the ▲ button to highlight YES and then press the OK button to delete the file.

4. Press the ESC button to exit at any time without deleteing the file.

Video Output

1. Turn the monitor on and select “PAL” or “NTSC”, to match the video monitor to be used,

under the VIDEO OUTPUT selection in the MENU screen.

2. Insert the video cable into the VIDEO OUT socket on the bottom of the monitor. Connect the

other end of the cable into the VIDEO IN jack of a TV or other monitor.

3. The unit will output a high quality video image.

Reset button

If the monitor becomes unresponsive due to an EMI field or other magnetic event, use a paper

clip or other pointed object to press the RESET button located on the bottom panel

Rear stand

The rear stand can be set to three positions. Lower (stored), middle position for bench viewing

and upper position for hanging.

FCC Information

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including interference that may cause

undesired operation.