User manual

HD450-EU V1.3– 04/10

USB PC Interface

Description

The HD450 meter can be connected to a PC via its USB interface. A USB cable, along with

Windows

software, is included with the meter. The software allows the user to:

 Transfer previously stored readings from the meter’s internal memory to a PC

 View, plot, analyze, store, and print readings data

 Remotely control the meter via virtual software buttons

 Record readings as they are taken. Subsequently, printing, storing, analyzing, etc.

the readings data

Meter to PC Connection

The supplied USB cable is used to connect the meter to a PC. Connect the smaller

connector end of the cable to the meter’s interface port (located under the tab at the left-

hand side of the meter). The larger connector end of the cable connects to a PC USB port.

Program Software

The supplied software allows the user to view readings in real-time on a PC. The readings

can be analyzed, zoomed, stored, and printed. Please refer to the HELP UTILITY available

from inside the software program for detailed software instructions. The main software

screen is shown below for preview.