User manual

HD400 – V2.0 – 5/08

Maintenance

Cleaning

The meter and its sensor can be cleaned with a damp cloth. A mild detergent may be used

but avoid solvents, abrasives, and harsh chemicals.

Battery Installation / Replacement

The battery compartment is located on the back of the meter. The compartment is easily

accessed by pressing and sliding the rear battery compartment cover off of the meter in

the direction of the molded arrow. Replace or install the 9V battery and close the battery

compartment by sliding the compartment cover back onto the meter.

You, as the end user, are legally bound (Battery ordinance) to return all used

batteries and accumulators; disposal in the household garbage is prohibited!

You can hand over your used batteries / accumulators, gratuitously, at the

collection points for our branches in your community or wherever batteries /

accumulators are sold!

Disposal

Follow the valid legal stipulations in respect of the disposal of the device at the

end of its lifecycle

Storing

When the meter is to be stored, please remove the battery and affix the sensor’s protective

cover. Avoid storing the meter in areas of extreme temperature and humidity.