User manual

HD400 – V2.0 – 5/08
6
USB PC Interface
Description
The HD400 meter can be connected to a PC via its USB interface. A USB cable, along with
Windows
TM
software, is included with the meter. The software allows the user to view,
store, and print readings from the PC.
Note
that the HD400 does not datalog readings, meaning that it does not store readings in
an internal memory; it simply displays readings on the PC as they are taken in real-time;
after which the readings can be analyzed, stored as text, or printed.
Meter to PC Connection
The supplied USB cable is used to connect the meter to a PC. Connect the smaller
connector end of the cable to the meter’s interface port (located under the tab at the left-
hand side of the meter). The larger connector end of the cable connects to a PC USB port.
Program Software
The supplied software allows the user to view readings in real-time on a PC. The readings
can be analyzed, zoomed, stored, and printed. Please refer to the HELP UTILITY available
from inside the software program for detailed software instructions