User manual

EX623-EU V2.3 04/10

General Specifications

Clamp jaw opening 1.25" (32mm) approx.

Display Dual 40,000/4,000 count backlit LCD

Non-Contact Voltage 100 to 600VAC

Continuity check Threshold 50Ω; Test current < 0.5mA

Diode test Test current of 0.3mA typical;

Open circuit voltage [ 2.8VDC typical

Low Battery indication Battery symbol is displayed

Over-range indication ‘OL’ display

Measurement rate 2 readings per second, nominal

Peak detector >1ms

Thermocouple sensor Type K thermocouple required

Fuse 500mA, ceramic fast blow

IR Spectral response 6 to 16µm

IR Emissivity 0.95 fixed

IR distance ratio 8:1

Laser pointer Class 2 laser < 1mW power; Wavelength is 630 to 670nm

Input Impedance 10MΩ (VDC and VAC)

AC bandwidth 50 to 400Hz (AAC and VAC)

AC response True rms (AAC and VAC)

Crest Factor 3.0 in 40A and 400A ranges, 1.4 in 1000A range (50/60Hz

and 5% to 100% of range)

Operating Temperature 5°C to 40°C (41°F to 104°F)

Storage Temperature -20°C to 60°C (-4°F to 140°F)

Operating Humidity Max 80% up to 31°C (87°F) decreasing linearly to 50% at

40°C (104°F)

Storage Humidity <80%

Operating Altitude 7000ft. (2000meters) maximum.

Battery One (1) 9V Battery (NEDA 1604)

Auto power OFF After approx. 30 minutes, with disable

Dimensions & Weight 9.5x3.8x1.75” (241x96x44.5mm); 13.6 oz. (386g)

Safety For indoor use and in accordance with the requirements for

double insulation to IEC1010-1 (2001): EN61010-1 (2001)

Overvoltage Category III 600V and Category II 1000V,

Pollution Degree 2.

Approvals CE

Patent notice U.S. Patent 7163336