User's Guide Dual Input True RMS AC Voltage/Current Datalogger Model DL160 / DL162
Introduction Congratulations on your purchase of this Dual Input Voltage / Current datalogger. With this meter, you can monitor and log data (Voltage/Voltage, Current/Current or Voltage/Current) over long periods of time and then easily transfer the data to a pc for viewing and evaluation. The LCD display provides real time data, Max/Min data and time information. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Description and Button Functions 1. LCD Description REC: Auto power off (does not apply when recording), the meter will automatically shuts off after 5mins without any button presses. Recording status. After the record mode is set up by the software, press the START/STOP button for more than 4 seconds to begin recording. This icon will be displayed and indicates the meter is recording data. Press the same button again for more than 4 seconds to stop recording. Record until full is selected.
Operation 1. Install 4 fresh AAA batteries or connect the AC adaptor. 2. Set-up the datalogger using the software provided. 3. Connect the voltage test leads or the current probes to the AC source to be measured. 4. Press and Hold the START/STOP button for four seconds to start recording. The “REC” icon will appear in the display indication that recording has begun. 5. Press and Hold the START/STOP button for four seconds to stop recording. The “REC” icon will disappear from the display. 6.
Specifications Display Maximum data points Channels Sample rate Analysis software Data output Current Clamp Jaw opening Open input indication Low battery indication Power supply Battery life AC Adaptor Multi-function LCD 256,000 values dual channel, TRMS AC Voltage or Current 1s to 24h selectable 2000/XP/ Vista USB port 12.7mm (0.5”) "LO" appears on the LCD Empty battery symbol appears on the LCD 4 AAA Batteries and 1 CR 3V memory button battery (CR2032 or equivalent) 5 days (approximately) 9V, 0.
