Datasheet

PRODUCT DATASHEET
Features
PRODUCT DATASHEET
CO30 Carbon Monoxide
(CO) Monitor
The Extech CO30 displays Carbon Monoxide (CO)
concentration, Air Temperature, and Relative
Humidity. Programmable audible alarm, with high
decibel beeper, sounds when CO concentration
rises to unsafe levels. Can be wall mounted or used
on a desktop close to areas of concern.
Features
• Alternately displays Carbon Monoxide (CO)
concentration, Air Temperature, and Relative Humidity
readings (cycles approximately every 6 seconds)
• Visible bright tri-colored LED indicator: Green <10ppm,
Yellow = 10 to 29ppm, and Red >30ppm
• LCD displays alarm icon, LED light turns red, and loud
audible beeper sounds when indoor CO level exceeds
set point (defaults at 30ppm — adjustable); beeper can
be temporarily turned off for false alarm
• Adjustable audible alarm sounds when reading
exceeds one of the selected ranges: 25ppm, 30ppm,
35ppm, 50ppm, 100ppm or 200ppm
• “ZERO” Re-Calibration function
• Manual Temperature and Relative Humidity
Compensation (adjustable)
• CO Calibration function in fresh air
• Four display error codes for troubleshooting
• Low battery indicator
• Recover to factory setting function
• Complete with built-in stand, side cover, Universal AC
Adaptor (multi-plugs US, EU, UK, and AU), and 4 AAA
batteries
Ordering
CO30 ................ Carbon Monoxide CO Monitor
www.extech.com
Specifications subject to change without notice. Copyright © 2014-2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 3/11/15
Specifications
Range Resolution Basic Accuracy
Carbon Monoxide (CO) 0 to 999ppm 1ppm ±5% of reading or ±10ppm
Temperature (Air) 32 to 122°F (0 to 50°C) 0.1°F/°C ±2°F/1°C
Relative Humidity 20 to 90%RH 1%RH ±5%RH @ 25°C
Dimensions/ Weight 4.4x4.3x2.1" (113x108x53mm)/ 5.6oz (159g)
Common Areas to Monitor CO Levels:
- Office buildings and conference rooms
- Boats, planes, and RVs
- Indoor work places such as warehouses that use propane- and gasoline-powered fork lifts
- Manufacturing plants of temporary heating units and gasoline-powered appliances
NOTE: The CO30 Carbon Monoxide Monitor is intended for general purpose Air Quality monitoring only, and has not been certified for use pursuant to any
state or city safety Carbon Monoxide Alarm or Monitoring requirements.
The CO30 Carbon Monoxide Monitor has not been tested by an independent lab to comply with UL 2034 or IAS 6-96 standard.
It is the responsibility of the customer to obtain and apply current local, state, and national regulations with regard to CO alarms, monitoring and testing.
<10ppm Normal
=10 to 29ppm Caution
>30ppm Danger
Bright Tri-colored LED Indicator for CO Level
UPC Code: 793950500309