User manual

ExStik
TM
CL200A-EU V4.0 02/08
9
Battery Replacement
1. Twist off the battery compartment cap
2. Replace the four (4) CR2032 batteries
observing polarity.
3. Replace the battery compartment cap
You, as the end user, are legally bound (Battery ordinance) to
return all used batteries and accumulators; disposal in the
household garbage is prohibited!
You can hand over your used batteries / accumulators,
gratuitously, at the collection points for our branches in your
community or wherever batteries / accumulators are sold!
Disposal
Follow the valid legal stipulations in respect of the disposal of
the device at the end of its lifecycle
Specifications
Display Multifunction LCD with Bargraph
Operating conditions 0 to 50
o
C (32 to 122
o
F) and < 80% RH
Chlorine range 0.01 to 10.00 ppm (Total Chlorine)
Chlorine accuracy 0.05 to 5.00ppm; ± (10%reading + 0.01ppm)
5.00 to 10.00ppm; ± (15%reading + 0.05ppm)
Temperature -5 to 90
o
C (23 to 194
o
F)
measurement range
Temperature range 0 to 50
o
C (32 to 122
o
F)
for Chlorine
measurement
Temp. Resolution 0.1
o
up to 99.9 then 1
o
Temp. Accuracy ± 1
o
C (1.8
o
F) from -5 to 50
o
C (23 to 122
o
F);
± 3
o
C (5.4
o
F) from 50 to 90
o
C (122 to 194
o
F)
Measurement storage 15 readings can be stored and recalled
Low battery indication ‘BAT’ appears on the LCD
Power Four (4) CR2032 batteries
Dimensions 35.6x172.7x40.6mm (1.4x6.8x1.6”); 110g (3.85oz)
Auto power off Automatically turns off after 10 minutes after the last key
press
Copyright © 2008 Extech Instruments Corporation
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com