User manual

ExStik

CL200A-EU V4.0 02/08

Meter Description

CL200 Front Panel Description

The ExStik’s

keys have functions which

change depending on the electrode

attached (pH, ORP or Chlorine). Key

descriptions here apply for the ExStik

with

a chlorine electrode attached.

1. Battery compartment

2. LCD Display

3. MODE button (store data)

4. CAL button (change temperature units

and recall data. Calibration not required

for chlorine)

5. ON/OFF button

6. Electrode Collar

7. Electrode

(Note: The Electrode cap is not shown)

ExStik

CL200 Display

1. Bargraph display

2. Measurement display

3. BAT (low battery) and

HOLD (data hold) indicators

4. Temperature display

5. Bargraph scale designations

6. Unit of measure

CAUTIONS

• This device is not a toy and must not reach children’s hands. It contains hazardous

objects as well as small parts that the children could swallow. In case a child

swallows any of them, please contact a physician immediately

• Do not leave batteries and packing material lying around unattended; they can be

dangerous for children if they use them as toys

• In case the device is going to be unused for an extended period of time, remove the

batteries to prevent them from training

• Expired or damaged batteries can cause cauterization on contact with the skin.

Always, therefore, use suitable hand gloves in such cases

• See that the batteries are not short-circuited. Do not throw batteries into the fire.