User manual

CG304-en-GB_v2.3 5/17

Note: Turn on Bluetooth only when necessary as the battery will drain more quickly with

Bluetooth powered ON.

Press the LEFT button (SELECT) button to confirm and to return to the SET menu

(otherwise press the right button [BACK] to abort the edit and return to the SET menu).

e. Contrast

From the SET menu, scroll to the CONTRAST selection. Press the LEFT button (SELECT) to

open CONTRAST. Use the UP and DOWN arrow buttons to adjust the contrast. Press OK

to return to the main menu or select BACK to return to the SET menu.

f. Info

From the SET menu, scroll to the INFO selection. Press the LEFT button (SELECT) to open

INFO. View the firmware version and serial number of the meter.

Use the RIGHT button (BACK) to move back through the menu items all the way to the

normal measurement mode if desired.

MEASURE VIEW MENU

The Measure View menu allows for scrolling through the readings in all of the groups. Readings

can be viewed or deleted in this mode.

1. Press the LEFT button to access the main menu.

2. Use the DOWN ARROW button to scroll down to MEASURE VIEW.

3. Press LEFT (SELECT) to open the MEASURE VIEW parameter.

4. Use the UP/DOWN ARROW buttons to scroll through the groups of stored readings.

5. When a group is highlighted that contains stored readings, use the LEFT arrow button to

open the readings list. Now use the UP/DOWN arrows to view the readings. Press the LEFT

button (Delete Group) to delete all readings in this Group or press the RIGHT button (BACK)

to return to the main Group list.

6. Highlight ‘Delete All’ and press the LEFT button (SELECT) to delete all of the readings in all

groups. Otherwise press the RIGHT button (BACK) to return to the previous menu.