User Manual

BR200-BR250-en-GB_v7.6 7/17

Introduction

Congratulations on your purchase of this Extech BR200 (17mm camera head) or BR250 (9mm

camera head) Video Borescope. This instrument was designed for use as a remote inspection

device. It can be used to peer into tight spots and then supply real-time video and images that can

be recorded. Typical applications include HVAC inspection, automotive inspection, cable routing,

and automotive/boat/aircraft inspection. This meter is shipped fully tested and, with proper use, will

provide years of reliable service.

Features

• 3.5 '' TFT-LCD palm LCD monitor with high resolution

• The image head and the cable are water resistant when the unit is fully assembled (the

monitor and the camera are not water resistant)

• Wireless and hard-wired functionality

• The monitor records video and images

• Micro SD card memory (16G max. size).

Safety

• Do not expose instrument to moisture

• Shut off the instrument when not in use

• Remove the batteries when cleaning the instrument

• Replace all batteries at the same time

Supplied Equipment

1. Camera

2. LCD Monitor

3. Monitor Adaptor

4. Adaptor cable

5. Accessory Magnet / Hook / Mirror

6. Magnetic mount

7. Flex cable and camera head

8. 4 AA Batteries

Note: Micro SD card and adaptor (not shown)