User Manual

BR200-BR250-en-GB_v7.6 7/17

Specifications

CAMERA

Imaging Sensor CMOS

Total Pixels (NTSC) BR200: 712 x 486; BR250: 640 x 480

Horizontal View Angle BR200: 50 degrees

BR250: 45 degrees

Transmission Frequency 2468MHz

Focus point BR200: 20cm (8”), BR250: 10cm (4”)

Minimum Illumination 0 Lux

Modulation Type FM

Bandwidth 18MHz

Power Supply 4 x AA batteries

Unobstructed Effective Range 10m

Waterproof Capacity IP67 (imager head only)

Dimensions (W D H) 186 x 145 x 41(mm) (Exclude Flexible Tube)

Weight (approx) BR200: 530g

BR250: 450g

Camera head Diameter BR200: 17mm (0.67”)

BR250: 9mm (0.36”)

Operating Temperature -10°C~+50°C

+14°F~+122°F

MONITOR

LCD Screen Type 3.5” TFT-LCD

Effective Pixels 320 (R.G.B.) x 240

Video System PAL/NTSC

Transmission Frequency 2468MHz (CH 4)

Exterior Supply Voltage 5VDC

Consumption Current (Max.) 500mA

Charge Time 3 hours

Work Time 2 hours

Video Output Level 0.9-1.3VP-P@75Ώ

Receiving Sensitivity ≤-85dBm

Dimensions (W x D x H) 100 x 70 x 25(mm)

Weight (Approx) 140g

Operating Temperature -10°C~+50°C

+14°F~+122°F

Operating Humidity (Max.) 15~85%RH

FCC Information

This device complies with part 15 of the FCC rules.

BR250/200: FCC-ID TW5GB8802-GB8803

Operation is subject to the following two conditions:

1. This device may not cause harmful interference

2. This device must accept any interference received, including interference that may cause

undesired operation.

Al l rights reserve d including the right of re production in whole or in part in any form

ISO-9001 Certified