Product Manual

BR200-BR250-EN-V6.2 -7/10

Operation

Basic Operation

1. Turn the ON/OFF dial switch to power the camera. The power

indicator will switch on. The switch then acts as a dimmer for the

two LEDs on the imager head of the camera.

2. Press and hold the monitor power switch for at least 2 seconds

and the power indicator will illuminate green and a Welcome

screen will appear.

3. Before attaching the monitor to the instrument body, press the

down arrow button to select channel 4. The real time image will

appear on the display LCD monitor.

Note. If the picture does not properly syncronize or has poor

color, check that the Video System Settings are set to “NTSC”,

not to ‘PAL” . This should fix the condition..

4. Use the up arrow to select video or photo mode.

5. Turn the ON/OFF dial to adjust the LED light intensity as desired.

6. The tube can be easily maneuvered into position. The tube can

be bent into the shape of the area to be examined.

7. Use the supplied accessories to help retrieve small items.

Taking a Picture

In Photo mode, press OK to take a picture. The photo will

automatically save to the SD card.

Recording a Video

In Real-Time Monitoring (video) mode, press OK to begin recording;

refer to the following diagram for display icon definitions: