User Manual

4-7-3 Deleting stored values
Once the memory is full, the entire contents of the memory can be cleared.
READ
MEM MEM
1. Press
to turn off the meter.
2. Press and hold MEM and turn on the meter again; the display will shows:
“
” and “ ”.
3. Press
▼ to select “ ”.
4. Press
▲ to clear memory.
4
5.0 Battery Installation and Replacement
5-1 Battery Loading
Remove the rear battery cover and insert a fresh 9V battery.
5-2 Battery Replacement
When the battery voltage drops below the operating voltage, the battery icon
appears and flashes. If it appears, the battery should be replaced.
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Back to the Extech 480836 Product Page
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX [phone] - TestEquipmentDepot.com