User Manual

Meter Description
1. Sensor plug shown inserted in meter’s sensor jack
2. LCD Display
3. XYZ axis select button
4. Manual Range button
5. Power button
6. Data Hold button
7. Unit select button
8. Sensor
9. Sensor grip handle
10. Tripod mount
11. Pull-out tilt stand
12. Battery compartment access
screw
13. Battery compartment cover
Specifications
Display 3-1/2 digit (2000 count) LCD
Measurement rate Approx. 0.4 seconds
Ranges and resolution 20µTesla (0.01) and 200mGauss (0.1)
200µTesla (0.1) and 2000mGauss (1)
2000µTesla (1) and 20,000mGauss (10)
NOTE: 1 µTesla = 10 mGauss
± (4%FS + 3 digits) for 20µTesla and 200mGauss ranges
± (5%FS + 3 digits) for 200µTesla and 2000mGauss
ranges
Accuracy
(stated for 50/60Hz)
± (10%FS + 5 digits) 2000µTesla & 20,000mGauss ranges
Frequency bandwidth 30 to 300Hz
Over-range indication “1___” is displayed
Operating
Temperature/Humidity
Temperature: 32 to 122
o
F (0 to 50°C)
RH: 90% max. from 32 to 95°F (0 to 35°C);
80% max. from 95 to 122°F (35 to 50°C)
Power source 9V Battery
Power consumption Approx. 2.7mA DC
Dimensions Meter: 7.6 x 2.6 x 1.2” (195 x 68 x 30mm)
Probe: 2.8 x 2.3 x 8.7” (70 x 58 x 220mm)
Sensor Cable Length 3 ft (1m) approx.
Weight 16.2 oz. (460g) including probe and battery
1
4
2
3
8
9
7
5
6
OPEN
10
13
12
11
EMF Exposure
The effect of EMF exposure is a modern day concern. At the time of this writing, to the best
of our knowledge, no standards or recommendations exist regarding limits of EMF
exposure. Exposure limits of 1 to 3mG have been suggested by several international
bodies. Until evidence suggests that there is not a health risk associated with EMF
exposure, common sense would dictate that a practice of minimal exposure be exercised.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX [phone] - TestEquipmentDepot.com