User Guide

Specifications subject to change without notice.
Copyright © 2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
6/13/08 - R1
Enables user of a clamp meter to measure current on
a 2-wire or 3-wire power cord to 15 Amps
With RS-232 interface for recording data to a PC for analysis
AC Line Separator
Ordering Information:
480172 ........................AC Line Separator 3-prong plug
480292 ........................AC Line Separator 2-prong plug
Features:
• Plugging the power connector into the Line Splitter separates
the hot/live conductor from the neutral (and ground)
• Voltage check function
• Two clamp positions:
x1 for direct readings
x10 for actual reading multiplied by 10
• Dimensions: 5.25x2x1(133x51x25mm)
• Weight: 5.8 oz (164.4g)
Provides easy and safe measurement of current
without the need to cut off the plug and separate
the conductors
99 Washington Street
Melrose, MA 02176
Phone [phone]
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
Back to the Extech 480172 Product Page
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX [phone] - TestEquipmentDepot.com