User manual

407790A-en-US_v2.0 8/16
24
7. Use the

+
/

-
buttons to select the desired trigger band then press the button.
8. Use the

+
/

-
buttons to select “4)
.
SlopeType” then press the button.
9. Use the

+
/

-
buttons to select the desired trigger slope + or Slope‐. Then press the 
button.
Note: For LEVEL 2 trigger, ignore the slope setting and only use the Slope+ trigger.
10. Press the MENU button to return to the measurement screen.
11. Press the R button on the meter to start automatic recording. The meter will start
recording when the trigger level is exceeded.
AP
AP
