User Manual

11 VPC300-en-GB_v1.9 5/18
LEVEL (ALARM LIMIT) INDICATION
Select the Alarm Limit (Level) of the corresponding particle size. When the selected particle
size is exceeded, the instrument alerts the user. From the Particle setup menu, use the Up and
Down arrows to select Level Indication. Press the Enter ( ) button to enter the option. Use
the arrow buttons to select the desired alarm limit and then press ESC to save setting and
return to the menu.
Memory Storage Browser
When the meter is switched ON, these LCD icons are
visible . Press F1 to enter the data memory
section. There are three options available in the memory mode,
Picture, Video, and Particle Logs.
Use the arrow buttons to select one and then press ENTER ( ) to
access the selection.
When browsing images, data, and video use the arrow buttons to
navigate, use the Enter button to select, and use the ESC or F3
button to return to the menu.
Press ESC again to exit to the power-on screen.