Manualshelf

User Manual

ManualsBrandsExtech Instruments ManualsKitchenColor Waveform Ultrasonic Thickness Gauge/Datalogger
21222324252627282930
TKG250 Ultrasonic Thickness Gauge
27
1. Use the up and down arrow keys to highlight the Fast option and press the OK
key. Or once Fast is highlighted, use Quick Access mode by pressing left or right
arrow key as indicated in the top right corner of the display screen.
The following parameters are available:
2. Use the up and down arrow keys to select the desired parameter and press the OK
key.
3. Press OK key again to accept and return to Measure mode.
In the Measure mode in either the Datalogger or Non-datalogger version of the gauge,
the selected Fast option setting is displayed under the thickness reading as shown in the
screens below: