User Manual

TKG250 Ultrasonic Thickness Gauge
25
The entire list of available clock setup options are as follows:
TIME FMT 12 HR
DATE FMT MM/DD
MINUTE 21
HOUR 01 PM
DAY 01
MONTH 01
YEAR 2005
To set the time and date, follow these steps:
1. Select Clock option from the Initial Setup screen.
The following is an example of what the clock setup screen might look like
depending on the previous setup.
To change the Time Format, select TIME FMT using up/down arrow keys. Use
the left/right arrow keys to select between 12 HR and 24 HR options.
2. To change the Date Format, select DATE FMT using up/down arrow keys. Use
the left/right arrow keys to select between MM/DD and DD/MM options.
3. To set Minute, select the MINUTE option using up/down arrow keys. Use
left/right arrow keys to decrease/increase the minute value. You can set the
minute value from 00 to 59.