User Manual

6 Using the Echo-to-Echo Option (TKG150

only)

The Echo-to-Echo option allows you to make

measurements between two consecutive back-wall

echoes. Therefore, a good usage of the Echo-to-Echo

option is for measuring through coatings to measure only

the true metal thickness. There are two Echo-to-Echo

options you can select, which are as follows:

 Echo-to-Echo On: Enables the Echo-to-Echo

function

 Echo-to-Echo Off: Disables the Echo-to-Echo

function

In the Measurements mode screen in the Main menu,

highlight the E-TO-E option and select the desired

option using the right/left arrow keys. Press F1 to exit

Measurement mode and save settings and F1 again to get

back to the measurement mode.