User Manual

27
Measurement Mode without a Datalogger
(TKG100)
The TKG100 display screen in Measurement mode will
look like the screen below:
To continue in Measurement mode, follow these steps:
1. Press the F1 key to select the Alarm option.
(See: Alarm section.)
2. Press the F2 key to select the Freeze option.
(See: Freeze section.)
3. Press the F3 key to control the display
backlight. (See: Display Backlight)
4. Press the Menu / OK key to select the Menu
option. (See: Menu section.)
Note: The available choices for F1, F2, F3 are
different for the TKG100 series thickness gauge.