User Manual

SD200-EN v1.9 08/13
7
Specifications
Display 2.4 x 2.0” (60 mm x 50 mm) LCD
Temperature probes Type K thermocouple
Memory Card SD memory card, 1 GB to 16 GB.
Datalogger Sampling Time 5/10/30/60/120/300/600 seconds or Auto.
Temperature Compensation Automatic
Display update rate Approx. 1 second
Data Output RS 232
Operating Temperature 32 to 122°F (0 to 50 °C)
Operating Humidity Less than 85% R.H.
Power Supply 6 AAA (UM4) Alkaline or heavy duty 1.5 V batteries or
9V AC adaptor.
Battery life Dependent on sample rate, for new alkaline batteries and 60 second
sampling time, > one month is typical. Fast sample rates will
significantly reduce battery life.
Weight 0.44 LB /199 g
Dimension 5.2 x 3.1 x 1.3“(132 x 80 x 32 mm)
Type K Thermometer
Range
Resolution
Accuracy (of reading)
-50.0 to 1300.0 °C
0.1°C
±( 0.5 % + 0.5°C)
-50.1 to -100.0°C
±( 0.5 % + 1°C )
-58.0 to 2372.0°F
0.1°F
±( 0.5 % + 1°F )
-58.1 to -148.0°F
±( 0.5 % + 1.8°F )
Note: Above specification tests under the environment RF Field Strength less than 3 V/M & frequency
less than 30 MHz only.
Battery Safety Reminders
 Please dispose of batteries responsibly; always observe local, state, and federal regulations
with regard to battery disposal.
 Never dispose of batteries in a fire. Batteries may explode or leak.
 Never mix battery types. Always install new batteries of the same type.