User`s manual

10.3 How to set a start trigger
General
A start trigger can be regarded as a condition that starts the recording of the event,
once the value of the condition is met. In FLIR R&D software you can use the following
types of start trigger:
■
Manual: The recording is started manually.
■
Date & Time: The recording is started at a set date and time.
■
Conditional: The recording is started when a measurement value in the image
falls above or below a set value. This assumes that you have laid out at least one
measurement tool in the image.
■
External trigger: To let the digital input in FLIR A325 start the recording.
Figure
T630420;a1
Procedure
Follow this procedure:
Go to Analyze > Recording.1
Click the encircled button (see the image above). This will display a Start
trigger list box where you can select the desired start trigger type.
2
(When all start and stop triggers parameters are set.)
On the recording toolbar, click Arm. This arms the trigger, and the program
is now ready to start recording the event once the trigger condition is met.
3
NOTE
For an explanation of screen elements, see section 9 – Overview of screen elements
on page 25.
50 Publ. No. T559132 Rev. a449 – ENGLISH (EN) – April 21, 2010
10 – Recording sequence files