User`s manual

10 Recording sequence files
10.1 How to set the recording speed
General
Before you start your recording, you need to set the recording speed. The recording
speed is the number of frames per second that are saved in the file when you record
a sequence.
You can set the recording speed using two different methods:
■
Change the camera frame rate.
■
Specify a time interval between saved image frames.
Procedure
Follow this procedure:
Go to Analyze > Recording.1
Do one of the following:
■
Select a new frame rate in the drop-down menu.
■
Specify a time interval between saved image frames.
In a few seconds you will see how the Actual frame rate under Performance
will be updated to match the changed frame rate. Note that discrepancies
may occur for higher frame rates, due to some cameras not being able to
deliver that frame rate.
2
NOTE
For an explanation of screen elements, see section 9 – Overview of screen elements
on page 25.
48 Publ. No. T559132 Rev. a449 – ENGLISH (EN) – April 21, 2010