User`s manual

Button to do the following:
■
Automatically adjust the image for the best brightness and contrast.
■
Change the level (by dragging the button).
■
Change the span (by SHIFT-dragging the button).
6
Text boxes to enter the following:
■
Min: You use this text box to set specific minimum temperature levels
in the image.
■
Max: You use this text box to set specific maximum temperature levels
in the image.
■
Level: You use this text box to set the temperature level of the image
■
Span: You use this text box to set the temperature span of the image
Note: These are four mutually exclusive methods to change the same
temperature values.
7
Slider to change the upper temperature value.8
Button to assign a color to temperatures between two set temperature levels,
but color-inverted.
9
Button assign a color to temperatures between two set temperature levels
(text boxes diplayed below).
10
Area in the temperature scale where the defined isotherm color is displayed.11
Button to assign a color to temperatures above a set temperature level.12
Button to assign a color to temperatures below a set temperature level.13
46 Publ. No. T559132 Rev. a449 – ENGLISH (EN) – April 21, 2010
9 – Overview of screen elements