User`s manual

8.3 Adjusting the image or sequence file

General

You can adjust an image or sequence file using three different adjustment methods,

and you may likely need to try different methods to see which one suits your applica-

tion the best.

Adjustment

methods

You can choose between the following adjustment methods:

Auto: The image or sequence file is automatically adjusted to best image brightness

and contrast.

2 Min/max: The upper and lower temperature values are set explicitly, by using

sliders or entering values in text boxes.

3 Level/Span: The temperature level is set explicitly, by using sliders or entering

values in text boxes, and the span is set in the same way.

Note that method 2 and 3 are identical with regard to what they do to the image or

sequence file, but let you enter values in different ways.

Figure

T630412;a3

Procedure

Follow this procedure:

Go to the the Scale pane.1

Do one of the following:

■

Click to auto-adjust the image.

■

Enter values for Min/max or Level/Span.

NOTE

For an explanation of screen elements, see section 9 – Overview of screen elements

on page 25.

Publ. No. T559132 Rev. a449 – ENGLISH (EN) – April 21, 2010 21

8 – Getting started