User`s manual

5.3 Installation of FLIR R&D software

NOTE

You must be an Administrator or a user with Administrative Rights to install the

program.

■

A complete installation consists of several subinstallations, some of which are

from third party vendors. Do not abort these subinstallations, as they are needed

for the complete installation.

■

A complete installation may take up to 30 minutes to complete.

■

At a certain time during the installation, Microsoft

warns repeatedly that the

software has not passed Windows

Logo testing. In all cases, select Continue

Anyway. There is no risk involved with this.

■

If you are asked to restart the computer during the installation, do so without re-

moving the CD-ROM. The installation will resume after you have restarted.

Procedure

Follow this procedure to install FLIR R&D software:

Close down all applications.1

Insert the FLIR R&D software software CD-ROM into the CD-ROM drive on

the computer. The installation should start automatically.

Should the installation not start automatically, start Windows® Explorer and

double-click SETUP.EXE on the CD-ROM.

Follow the on-screen instructions.3

Publ. No. T559132 Rev. a449 – ENGLISH (EN) – April 21, 2010 7

5 – Installation