Datasheet

Specifications subject to change without notice.
Copyright © 2009-2014 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
6/4/14 - R1
Features:
Quickly indicates the moisture content of
materials with Pinless technology without
damaging the surface; Remote Pin-type
probe (MO-P1 included) allows for contact
moisture readings (3ft/0.9m cable length)
Manually store/recall up to 20 labeled
readings
Works on multiple wood types and other
building materials
Easy to read, large dual display with
automatic backlight feature
Simultaneously displays moisture value
of wood or material being tested, Air
Temperature, IR Temperature, or Humidity
Pinless measurement depth to 0.75" (19mm)
below the surface
Programmable high/low Moisture and
Humidity alarms
Designed with an IR circuit to measure
non-contact surface temperature; 8:1
distance to spot ratio with 0.95 fixed
emissivity
Built-in Humidity/Temperature probe
measures Relative Humidity, Air Temperature
plus Grains Per Pound (GPP)/(g/kg), Dew
Point (DP), Vapor Pressure, and condensation
point
Automatic calculation of differential
Temperature (IR - DP) to determine
condensation point
Fast Analog Bargraph
Min/Max and Data Hold
Auto power off and low battery indication
Complete with pin moisture probe with cable,
9V battery and case
8-in-1 Meter with Memory and Built-in IR Thermometer
Monitor moisture in wood and other building materials with virtually no surface damage with the Pinless Moisture sensor
(Pin-type Moisture Probe included). Stores up to 20 labeled readings for further analysis. Measure Humidity and Air
Temperature with built-in probe plus non-contact InfraRed Temperature design.
Pinless Moisture Psychrometer + IR Thermometer
Built-in IR thermometer design
locates cold spots on walls, which
identifies surfaces subject to
condensation (direct differential
display of IR - DP)
Measure moisture of wall
material with non-invasive
Pinless technology
Pin Moisture Probe included for
making contact moisture
measurements
Specifications
Sensor Type Non-Penetrating
Memory Manually Store/Recall 20 data readings
Pinless Moisture 6 to 99.9 (Relative)
Pinless Depth up to 0.75" (19mm)
Pin-type Moisture (probe included) 0 to 99.9%
Max Resolution 0.1, 0.1°F/°C
Humidity 0 to 100%RH
Temperature (Air) -20 to 170°F (-29 to 77°C)
Temperature (IR) -4 to 392°F (-20 to 200°C)
Vapor Pressure 0 to 20.0kPA
Dew Point -22 to 199°F (-30 to 100°C)
Mixing ratio 0 to 999GPP (0 to 160g/kg)
Field of View 8:1 Distance to Target ratio
Emissivity 0.95 fixed
Dimensions 6.5x2.8x1.5” (165x70x38)
Weight 7.4oz (210g)
Ordering Information:
MO295................Pinless Moisture Psychrometer w/Memory + IR Thermometer
MO295-NISTL* ..MO295 with NIST Certificate
MO290-P ............Replacement Pin Moisture Probe
*NISTL is a Limited NIST: Product is certified to 33% & 75% Humidity and 77°F &150°F IR Temperature

Summary of content (1 pages)