Datasheet

PRODUCT DATASHEETPRODUCT DATASHEET
MA610 600A
Clamp Meter + NCV
The MA610 is a fully loaded clamp meter
with multimeter functions including AC
Current, AC/DC Voltage, Resistance,
Frequency, and Capacitance. It also
has a built-in non-contact voltage (NCV)
detector to quickly check circuits and
wires for live voltages.
Features
• Pocket-sized meter with 1.2" (30mm) jaw size fits
conductors up to 500MCM
• Built-in Non-Contact Voltage (NCV) detector
• MultiMeter functions include Resistance,
Capacitance and Frequency
• Relative Mode for Capacitance
• Data Hold freezes reading on display
• Auto Power Off with disable and Low Battery indication
• Large backlit LCD display
• Complete with test leads, three AAA batteries,
and pouch
Ordering
MA610 N ......... 600A AC Clamp Meter
www.extech.com
Specifications subject to change without notice. Copyright © 2017 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form.
Rev. 5/17/17
N Indicates products that are available with optional calibration traceable to NIST. Order with -NIST after part number.
UPC Code: 793950376119
Specifications Range Max Resolution Basic Accuracy
AC Current 600.0A 1mA ±2.0%
DC Voltage 600V 0.1mV ±0.8%
AC Voltage 600V 1mV ±1.2%
Non-Contact Voltage (NCV) 100 to 600V
Resistance 40MΩ 0.1Ω
Capacitance 100µF 0.01nF
Frequency 1MHz 0.01Hz
Diode/Continuity Yes
Dimensions/Weight 9x3x1.6" (228x77x41mm)/ 9.3oz (265g)