Instruction manual

3 382860 Ver. 1.5 2/01
Mode Measuring
Range
Accuracy Resolution
4kHz 1Hz
40kHz 10Hz
400kHz 100Hz
4MHz 1kHz
Frequency
(Sensitivity:>300mVrms)
40MHz
± (0.1% + 2dgts)
10kHz
Temperature
-40°C to 200°C ± (3%+5dgts)
+200°C to 1200°C ± (3%+2dgts)
1°C
Mode Range Accuracy Resolution
400Ω 0.1Ω
4k Ω
1Ω
40k Ω 10Ω
400k Ω 100Ω
4M Ω
± (0.5% + 1dgts)
1kΩ
Resistance
40M Ω
± (1% + 2dgts)
10kΩ
4nF 1pF
40nF 10pF
400nF 100pF
4uF 1nF
40uF 10nF
Capacitance
400uF
±2.0 (rdg + 2digits)
100nF
Diode Test Range 0 to 2000mV, Test current 1.5mA
max. at 1 k ohm, Forward Voltage max. 2.0V
1mV
Continuity Check 400 Ohm; Audible tone < approx. 40 Ohm
Mode Measuring Range Accuracy
Power Measurements
AC Current
AC Voltage
True Power
True Power
Phase angle (cosine)
To 16 A
91 to 120V
To 100 W
To 4000 W
- 90 to 90 degrees
+/-(2%+5dgts)
+/-(3%+3dgts)
+/-(5%+10dgts)
+/-(2%+5dgts)
Power Factor 00.00 to 1.00
2.3 Overload Protection
• 400mA AC/DC in the mA -range
• Resistance Measurement: 40 Mohm overload; Protection : 250 V DC/AC rms
• Frequency Measurement : 40MHz with max 750V DC/AC rms input voltage
• Diode Test/Continuity Test : overload protection : 250 VDC/VAC rms
• Logic Test : max. 39.99 VDC overload protection 250 VDC/VAC rms
Attention: Transistor, capacitance and temperature measurements are not
overload protected. Exceeding the max. input limits can be hazardous to
the user and can damage the meter.