User Manual

IR267enUS_v1.21/17
3
Safety
InternationalSafetySymbols
Thissymbol,adjacenttoanothersymbolorterminal,indicatestheusermustrefertothe
manualforfurtherinformation
Warnings
o Donotdirectlyorindirectlypointthelaserattheeyesofaperson orananimal
o Inspectfordamageorforanyshortageofpartsoraccessorie sbeforeuse
o Replacethebatteryimmediatelyafterthebatteryindicatorflashes
o Donotconnectanexternalprobetolive
electricalcircuits
o Donotsubmergeinwater
o Donotleavethethermometeronornearobjectsofhightemperature
o Donotusethethermometernearexplosivegases,steam,ordust
o Note that an object with high reflectivity will normally cause the measured temperature
valuetoread
muchlowerthantheactualtemperature
o UsethedeviceonlyasdescribedinthisUserGuide
Cautions
Toavoidthermometerdamage,pleaseavoidthef ollowinghazards:
o EMFfromweldingequipmentorelectroinductionheaters
o Staticelectricity
o Thermal shock caused by large or abrupt environmental
temperature changes; wait 30 minutes to allow the
thermometertostabilizetonewenvironmentalconditions
o Donotusethisdevice
inexcessively hightemperatureenvironments
o If the meter is to be stored for a long period of time the battery should be removed to
preventdamagetotheunit
<1mW Output at 650nm