Datasheet

HDV-TX1-EU-EN V2.4 4/13

Articulation Setup and Orientation

The articulation direction and orientation may change if the probe is twisted and coiled during

use or when stored. To re-orient the probe:

1. Place the extended probe on a flat surface

2. Set the tension “F” knob to the left or released position.

3. Set the articulation knob to the center position with the R Δ and Δ L

labels in the horizontal position.

4. Manually adjust the probe and camera to the zero degree position.

5. Rotate the articulation knob clockwise for a 120° bend.

6. If necessary, manually adjust the probe so that the camera lays flat on

the surface with a 120° articulation

7. Rotate the articulation knob counter-clockwise and confirm proper

orientation.

Specifications

Resolution 640 x 480 pixels

Length 1m (3.3’)

Outer diameter (O.D.) 6mm (0.24”)

Focus distance 2 to 6cm (0.79 to 2.36”)

Housing Stainless Steel

Field of View (FOV) 60º

Number of LEDs 4

Lamp Output max 3500 Lux at 20mm

Operating Temperature -20 to 70°C (-4 to 158°F)

Storage Temperature -20 to 70°C (-4 to 158°F)

This is product is warranted for one year.

ISO-9001 Certified