Manualshelf

Printer User Manual

ManualsBrandsExtech Instruments ManualsAll in One PrinterExtech Instruments Printer MSP-II
21222324252627282930
Page 26
Membrane Switch Functions
<SLCT> or <ON>
The <SLCT> switch is used to turn printer power on. The green <ON-Line> LED is turned on, if
printer is selected.
<FEED>
The <FEED> switch is used to advance the paper by one line.
<SET> or <OFF>
The <SET> switch is used to turn the printer OFF. The red <Error> LED starts flashing when
<SET> switch is pressed.
<ADVN> or < >
The <ADVN> switch is used to advance paper by one line.
Front Panel Indicators
<ON-Line> Green - If illuminated the printer is selected.
<Low BAT> Yellow - If illuminated the battery pack is depleted. Recharge battery pack if
LED is on.
<Charge> Yellow - If illuminated the battery is accepting charge.
Turns off automatically at the end of the charge cycle.
<Ready> Green - illuminated if the printer senses the presence of the AC power.
Green - illuminated if a command to Enable Magnetic card reader is
received.
<Error> Red - Flashing indicates start of power down process.
Red - illuminated steady if the battery is
too low to turn on the printer mechanism.
Red - illuminated steady Magnetic card
reading Error.