Printer User Manual

Page 31
Read Error Messages description
Error # Error Message Description
01 The Parity of the character read is opposite of the
card default parity.
02 The Checksum calculated did not match the one on the
card. The checksum is calculated by Exclusive-
OR' ing all the valid data on the card including Begin Sentinel and
End Sentinel, but excluding the checksum byte.
03 End Sentinel must exist on all cards, Reader did not
find the End Sentinel.
04 The Maximum number of characters allowed for a track
was exceeded. This may happen if End Sentinel is not
found. Refer to Table 1 for further details.
05 The command timeout has expired.
06 The Track Reader Escape command string transmitted
by Host contained an invalid character.
07 Invalid Track Number is selected. Tracks "1", "2" or
"3" can be selected.
08 Unsupported Track is Selected. Tracks "1", "2" or
"3" can be selected.
09 "Cancel Request" error string is transmitted if Host
cancels Magnetic card read in process.