User Manual

EX65x‐en‐GB_V1.6 7/16

CapacitanceMeasurementNotes:

 The display will show “OL” if a capacitor is short‐circuited or if the measured capacitance >

maximum range of the instrument.

 The bargraph is not active in the capacitance measurement mode.

 Capacitance measurements > 600μF may require several seconds to obtain a stable

reading.

 In order to ensure measurement accuracy, discharge residual charges before measuring

capacitance; Use maximum safety when working with high voltage capacitors to prevent

damage to the instrument and risk to personal safety.

 Disconnect test leads and circuit under test after measurements are completed.