SDS

Safety Data Sheet

Report No.:

STR18039029S Page 5 of 12

Shenzhen SEM.Test Technology Co., Ltd.

1/F, Building A, Hongwei Industrial Park, Liuxian 2nd

Road, Bao'an District, Shenzhen, P.R.C. (518101)

Section 5- Fire Fighting Measures

(a) Extinguishing media

Suitable extinguishing media: Use foam, dry powder or dry sand, CO2 as appropriate.

Unsuitable extinguishing media: No information available.

(b) Special hazards arising from the chemical

Under fire conditions, batteries may burst and release hazardous decomposition products when exposed to a

fire situation. This could result in the release of flammable or corrosive materials. Hazardous combustion

products: CO, CO2, Metal oxides, Irritating fumes.

Firefighters must wear fire resistant protective equipment and appropriate breathing apparatus. The staff must

equip with filtermask (full mask) or isolated breathing apparatus. The staff must wear the clothes which can

defense the fire and the toxic gas. Put out the fire in the upwind direction. Remove the container to the open

space as soon as possible. Spray water on the containers in the fireplace to keep them cool until finish

extinguishment.

Section 6- Accidental Release Measures

Personal precautions, protective equipment and emergency procedures:

If the battery is released, remove personnel from area until fumes dissipate. Provide maximum ventilation to

clear out hazardous gases. The preferred response is to leave the area and allow the vapors to dissipate. Avoid

skin and eyes contact or inhalation of vapors. Remove spilled liquid with absorbent and incinerated. If leakage

of the battery happens, liquid could be absorbed wit sand, earth or other inert substance and contaminated area

should be ventilated meantime.

Environment precautions:

Do not allow product to reach sewage system or any water sourse.

Inform respective authorities in case of seepage into water course or sewage system.

Do not allow to enter sewers/ surface or ground water.

DRAFT