User's Guide Dual Input True RMS AC Voltage/Current Datalogger Model DL160 / DL162
Introduction Congratulations on your purchase of this Dual Input Voltage / Current datalogger. With this meter, you can monitor and log data (Voltage/Voltage, Current/Current or Voltage/Current) over long periods of time and then easily transfer the data to a pc for viewing and evaluation. The LCD display provides real time data, Max/Min data and time information. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
Description and Button Functions 1. LCD Description REC: Auto power off (does not apply when recording), the meter will automatically shuts off after 5mins without any button presses. Recording status. After the record mode is set up by the software, press the START/STOP button for more than 4 seconds to begin recording. This icon will be displayed and indicates the meter is recording data. Press the same button again for more than 4 seconds to stop recording. Record until full is selected.
8. USB Port 9. AC Current Clamp Jaw: Clamp the jaws around a single conductor for AC current measurements to 200A 10. Jaw Opening Trigger: 11. CH Plug: 12. AC Voltage Probes or Alligator clips 13. Voltage module 14. CH Plug 4 DL160 V1.
Operation 1. Install 4 fresh AAA batteries or connect the AC adaptor. 2. Set-up the datalogger using the software provided. 3. Connect the voltage test leads or the current probes to the AC source to be measured. 4. Press and Hold the START/STOP button for four seconds to start recording. The “REC” icon will appear in the display indication that recording has begun. 5. Press and Hold the START/STOP button for four seconds to stop recording. The “REC” icon will disappear from the display. 6.
Specifications Display Maximum data points Channels Sample rate Analysis software Data output Current Clamp Jaw opening Open input indication Low battery indication Power supply Battery life AC Adaptor Standards Operating Temperature Operating Humidity Storage temperature: Storage Humidity Dimensions Weight Multi-function LCD 256,000 values dual channel, TRMS AC Voltage or Current 1s to 24h selectable 2000/XP/ Vista USB port 0.5” (12.
Warranty EXTECH INSTRUMENTS CORPORATION (A FLIR COMPANY) warrants this instrument to be free of defects in parts and workmanship for one year from date of shipment (a six month limited warranty applies to sensors and cables). If it should become necessary to return the instrument for service during or beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our website www.extech.com for contact information.
Garantía EXTECH INSTRUMENTS CORPORATION (UNA EMPRESA FLIR) garantiza este instrumento para estar libre de defectos en partes o mano de obra durante un año a partir de la fecha de embarque (se aplica una garantía limitada a seis meses para los cables y sensores). Si fuera necesario regresar el instrumento para servicio durante o después del periodo de garantía, llame al Departamento de Servicio a Clientes al teléfono (781) 890-7440 ext. 210 para autorización, o visite nuestra página en Internet www.extech.
Garantie EXTECH INSTRUMENTS CORPORATION (Une société FLIR) garantit que cet instrument est exempt de défauts matériaux et de fabrication pendant un an à partir de la date d’envoi (une garantie limitée de six mois s’applique aux capteurs et câbles). Si le renvoi de l’appareil pour réparation devient nécessaire durant ou après la période de garantie, contactez le service client au (781) 890-7440, poste 210, pour autorisation ou visitez notre site Web à l’adresse www.extech.com pour obtenir nos coordonnées.
