Datasheet

EXTECH INSTRUMENTS CORPORA

TION

285 Bear Hill Road, Waltham, MA 02451-1064, U.S.A.

Phone: 781-890-7440 • FAX 781-890-7864

ISO 9001:2000 CERTIFIED

05/02/05 - R1

•Local continuity checking -

is accomplished by a bright flashing LED and loud pulsating beeper.

•Remote continuity –

with the use of the remote probe, it does not tie-up two people

when identifying and labeling long distance wire/cable runs.

•Flashing remote probe -

Two lead, bi-color (red/green) LED probe allows a single user to

identify up to three wires or cables at a time for correct labeling

with only one trip to the other end location - cuts down on multiple

trips back and forth.

•Polarity verification -

Drives a 20mA DC current pulse through the wires or cables under

test to the bi-color remote probe. This enables the technician to

identify each of the wires under test at the other end of the cable

run and eliminates the possibility of false high impedance readings.

•Lightweight / Pocketsize -

clips on and hangs from the cable(s) under test without falling off.

•Electricians and Helpers

•Cable TV and Audio Systems Installers

•Alarm Technicians

•Plumbers

•HVAC Installers

•Auto Repair Technicians

•Carpenters, Handymen and Do-It-Yourself Homeowners

Product DATASHEET

Remote & Local Continuity Tester

One person operation for wire and cable testing

Ordering Information:

CT20 ................

Remote & Local Continuity T

ester

“Make mine an Extech!

™

”

www.extech.com