MSDS

Technical Specification
2010 / 04 / 15
GP001-392A-03 3 - 11
6. Electrical Characteristics
Test Conditions tested within 30 days after delivery
30
load resistance temperature Measuring time
22kΩ ± 0.5%
20 ± 2°C 0.3 sec
Off-load voltage
(V)
On-load voltage
(V)
Test Specification
New Battery
1.51 1.5
MIL-STD-105E, Class II,
Double Sampling, AQL=0.4
7. Service Output
Test Conditions tested within 30 days after delivery
30
Temperature 20 ± 2°C
Discharge Condition Average Minimum Discharge Time
Standard
Discharge
load
Daily
discharge
time
End Point
Voltage
(V)
New
Battery
After 12 mth. at room
temp.
12
IEC
22kΩ
24 hrs 1.2 410 hrs 370 hrs
Acceptance Criteria / :
(1) 9 pieces of battery will be tested for each discharging standard.
9
(2) The result of the average discharging time from each discharging standard shall be
equal to or more than the average minimum time requirement; and no more than
one battery has a service output less than 80% of the specified requirement.
80%
1
(3) One re-test is allowed to confirm the previous result.