User`s guide

42582-EN v6.1 07/13
6
Manual Datalogging Mode
This instrument has two datalogging modes, MEM Manual Datalogging (99 records maximum) and
LOG Automatic Datalogging (12,000 records maximum). Data saved in the Manual Datalogging mode
can be recalled in the display, printed or transferred to a pc.
Manual Datalogging basics
To take a reading and store it in memory:
1. Press the F2 MEM softkey from the WELCOME screen.
2. Use the arrow buttons to select a memory location (1 through 99).
3. Press and hold the ON key to take a measurement as previously described. Release the ON
key to end the test.
4. Press the F4 SAVE or the F1 ABORT key.
Manual Datalogging Display Screen 1
F1 EXIT: Press to return to the WELCOME screen
F2 MEAS Press to enter the measurement mode.
F3 EDIT: Press to begin customizing the header in the current memory location. Header
customization is covered in a dedicated section later in this manual.
F4 NEXT Go to Manual Datalogger Screen 2.
Manual Datalogging Display Screen 2
F1 EXIT: Press to return to the WELCOME screen
F2 CLR: Press for one second to erase the current memory location. Press and hold for longer
than one second to erase all records currently held in memory.
F3 PRN: Press to print one or more readings. The instrument will prompt the user for a start and
end memory point.
F3 BACK: Go to Manual Datalogger screen 1.
01: 07-06 05:42:50
Ext: 82.0 F
Ir: 82.0 F
o
o
EXIT NEXTEDIT
MANUAL DATALOG SCREEN 1
MEAS
02: 07-06 05:42:55
Ext: 82.0 F
Ir: 82.0 F
o
o
01: 07-06 05:42:50
Ext: 82.0 F
Ir: 82.0 F
o
o
EXIT BACKPRN
MANUAL DATALOG SCREEN 2
CLR
02: 07-06 05:42:55
Ext: 82.0 F
Ir: 82.0 F
o
o