Installation User Manual

Extang Corporation

5400 S. State Road

Ann Arbor, MI 48108

734 677-0444, Fax: 734 677-8409

extang.com

The SOLID FOLD top comes

fully assembled. Note any

damaged or missing

components before installing.

MISSING PARTS???

call Extang at

1-800-877-2588

Any and all needed parts will be

shipped to you directly.

(DO NOT return whole kit to store)

Wash truck bed.

Place assembled cover over

cab end of truck box.

1 2

Carefully refold the cover

without shifting its position on

the truck bed.

Unfold the cover fully and adjust

position over the truck bed for

proper cab/tail alignment.

Item No. 0182-1403 RH Printed in U.S.A.0214

PAGE 1
The SOLID FOLD top comes fully assembled. Note any damaged or missing components before installing. MISSING PARTS??? call Extang at 1-800-877-2588 Any and all needed parts will be shipped to you directly. (DO NOT return whole kit to store) 1 2 Place assembled cover over cab end of truck box. Wash truck bed. 3 Unfold the cover fully and adjust position over the truck bed for proper cab/tail alignment. Extang Corporation 5400 S.
PAGE 2
4 5 If your truck has a wall cap or bedliner that covers the metal bed wall flange, you will need to remove enough so that all the clamps make solid contact. Do not secure to only lip of bedliner or wall cap. Do Not Use Wrench or Overtighten! 100mm Trim only enough of the bed cap edge or liner wall so clamp contacts bottom of metal flange. 6 7 With tailgate open and front clamps secure, completely close the cover. Pull rear clamp down and hook under bottom edge of bed wall flange.
PAGE 3
Replacement Parts NOTE: To order replacement parts, itʼs best to contact our Customer Service Department for assistance, to ensure getting the correct part for your vehicle application. When ordering, xxx represents the 3 digit suffix, as referenced on the sales receipt or vehicle application list. Additional parts information can be found on our website, at http://extang.com/how.html.